Small knife. Big bite.
The F3 is the most compact blade in our F-series lineup — a 6.7-inch OAL fixed blade engineered to disappear on your belt and show up when it counts. The 2.9-inch CPM MagnaCut blade rides a full-size handle that fills your hand with a true 4-finger grip. The kind of fit you have to wrap your hand around to understand.
Designed for pure utility, the F3 is a tool first and a knife second. No tactical gimmicks. No mall-ninja angles. Just a hard-working fixed blade engineered to stand up to whatever the day throws at it — and come back tomorrow for more.
This is a working knife, plain and simple. Pry staples. Split kindling. Strip wire. Slice meat. Shred cardboard. Shave a feather stick. Snap zip ties. From the jobsite, through the backcountry, and right onto your cutting board — the F3 earns its keep.
A revolutionary stainless super steel built for hard use in unforgiving conditions. Get it wet. Get it dirty. Skip the oil. MagnaCut takes the worry — and the maintenance — out of carrying a premium fixed blade.
Every F3 blade is precision-machined and ground from CPM MagnaCut, then finished to either disappear into hard use or stand out as something worth a second look. Whether you choose Stonewash or Two-tone, you're getting the same proven blade geometry, the same MagnaCut steel, and the same lifetime of cutting work — finished to match the way you carry.
The stonewash finish is the F3's working uniform — a uniform matte texture that handles abuse the way the rest of the knife does: without complaint. The blasted and tumbled surface hides scratches, scuffs, and the inevitable patina of real use, so the blade you pull out of the sheath next year looks every bit as good as the one you carried home. No babying, no buffing, no worrying about the first time you set it down on the rocky ground or push it through a piece of seasoned oak.
For the hunter or soldier, stonewash means a blade that won't catch the sun at the wrong moment — and won't show every scratch from a long day in the field. For the bushcrafter, it means a finish that won't catch a fingerprint or telegraph every brush against bark and bone. For the tradesman, it means a knife that looks as ready on its tenth year of work as it did on the first. And for the EDC carrier who wants their knife to actually be used, stonewash is the finish built to look used, even when it's new — and look new, even when it's been used.
The two-tone finish takes the same hard-working F3 and lets the geometry of the blade do the talking — satin-polished bevels that catch the light, set against the muted, tumbled finish of stonewashed flats. The contrast of the satin bevels and stonewashed flats emphasizes the architecture of the grind and frames the F3 as the precise, purpose-built tool it actually is.
For the hunter who pays attention to every piece of his kit, two-tone means a blade that earns its place in the rotation. For the angler who treats his gear like an extension of his discipline, it means a knife that looks the part on the boat or in the wader belt. For the tradesman who takes pride in his tools, it means a working blade that doesn't apologize for looking sharp. And for the EDC carrier with a refined eye for craft, it means a knife that delivers on both edges of carry — built to perform, finished to turn heads.
Scary sharp out-of-the-box, with a hand-filling handle and slicing geometry that punches well above its size class. The ergonomic contouring mimics the shape of your hand, distributing pressure across your palm and fingers so you can grip, cut, and pry for hours without hot spots or hand fatigue.
The F3 handle is built from authentic UltreX® Composites — premium American-made knife handle materials machined in the USA to the exact contours of the F3 platform. Whether you choose G-10 or Canvas Micarta, you're getting a handle with real working pedigree, paired with the ergonomic geometry that makes the F3 comfortable to run all day long.
We could've cut corners and sourced cheap overseas composites. We didn't. Every F3 handle scale is machined from authentic UltreX® G-10 or UltreX® Micarta® — both produced by Norplex-Micarta in Postville, Iowa, USA. Norplex-Micarta has been producing high-pressure laminate composites for over a century, and their materials are trusted by true professionals across the knife, firearms, and industrial worlds. The "Made in America" promise on the F3 isn't just about who assembled it — it's American steel, American hands, and American composites, sourced from a domestic supply chain we can stand behind.
G-10 is a high-pressure laminate built from layers of fiberglass cloth saturated in epoxy resin and compressed under heat to create one of the toughest handle materials in the world. It's stronger than steel by weight, won't crack with age, won't melt in heat, won't rust, won't absorb moisture, and shrugs off the chemicals, oils, and solvents that destroy lesser materials. The vibrant colors are baked into the layup itself, so they won't fade, chip, or wear off — even after years of hard use.
For the hunter, G-10 means a handle that grips reliably through cold mornings, wet leaves, and rough field dressing. For the angler, it means a handle that doesn't care about saltwater, fish slime, or being dropped in the boat. For the soldier or law enforcement professional, it means a handle engineered for hard duty in any climate or environment. And for the everyday carrier who just wants a knife that looks as sharp on day one as it does after a decade, G-10 is the material that delivers.
Canvas Micarta is the time-tested favorite of hard-working hands — pioneered by Westinghouse a century ago and trusted ever since. Layers of woven cotton canvas are saturated in phenolic resin and compressed under heat and pressure into a handle material that does what almost nothing else can: gets grippier the wetter it gets. Where polymers slick out and G-10 plays it neutral, canvas Micarta drinks up moisture across its woven surface and rewards you with a tackier, more secure grip — exactly when you need it most.
For the bushcrafter, canvas Micarta means a handle that holds tight through rain, sweat, and sap on a long day in the timber. For the camper, it means a tool that gets warmer in the hand and develops a character no factory finish can fake. For the tradesman or working pro, it means a grip that doesn't quit when the work gets wet or messy. And for the EDC carrier who values the way a knife ages — softening and deepening into something unmistakably theirs — canvas Micarta is the material that earns its place over time.
Every F3 ships with a precision-molded, ambidextrous Kydex sheath paired with a removable Kydex belt clip. Waterproof, impact-resistant, and tuned for firm retention — your blade snaps in with a satisfying click and stays put until you call for it.
Crafted by skilled American hands using premium materials and modern manufacturing. The F3 is covered by our Carry No Cares Warranty™ — and if it ever gets lost or stolen, we'll replace it. That's a promise no overseas brand can make.
The F3 isn't a gadget. It's not a novelty. It's a hard-working American fixed blade earning its place at the top of your everyday carry. Strap it on. Put it to work. Pass it down.
